The JZ-016/Ç1 is designed to be used in Laboratories for Quality Control and Research on Plastics, Bituminous membranes and Compossed Materials.
The machine comprises a compact two column frame with adjustable upper cross beam driven by an electro-mechanical ram with a maximum capacity of 50 kN and a data acquisition system.The measuring system consists of a 20 kN capacity strain gauge load cell is fitted to the upper cross beam. The distance between grips 30 cm and grips’ width is 5 cm which is appropriate
TS 13047 samples.
Adjustable loading speed.
Comes complete with grips device.
The membrane pull device helps you to do one of the most important tests for membrane products. These products, which are a waterproofing material, are preferred in a structure or resistance systems. In this respect, it has a wide range of uses. It is also used to prevent water from entering the building system in granite systems. Thus, it is prevented that the concrete directly absorbs the liquid.
Membranes are formed by combining different layers. Since it is a very important insulation material, it should be tested immediately before it is given to the customer. Thus, it can be understood how it gives results and whether it is problematic.
Thanks to the membrane pulling device offered by our company in this context, it allows you to perform this test quickly. Thus, you can apply breaking force to the product and see how high quality it is.
Thus, you can make changes on your products if necessary during the production process and increase the quality of your products. You can instantly access first-class solutions with our easily maintained and used products. By taking advantage of our affordable prices, you can create your orders in a short time.
Membrane Pulling Device Features
Membrane pulling device is presented to you by our company with advanced features. It is manufactured in accordance with TS 13047 standards. Its features allow you to get the best results, such as;
The complete device is together with the pulling apparatus and jaws.
The device jaws and spacing are suitable for pulling material with a length of 30 cm and a width of 4 cm.
The upload speed can be adjusted easily.
There is a hold program with a digital display.
Speed can be adjusted. Thus, it is possible to process at different speeds.
It has a structure with an electronic display of 20 Kn capacity.
It is Loodcelli.
Thanks to these features, the membrane pulling device offers an advantageous use to workplaces.
What Does Membrane Tester Gain You?
It is used in membrane structures to protect against negative effects caused by water and humidity, and to offer comfortable waterproofing to living spaces. It is especially seen in places such as viaducts, bridges, roofs, terraces, gardens and basements.
In this respect, the membrane is widely used today. The products must also be of the highest quality in terms of their structural features. Just waterproofing is not enough. It is also a very important detail that it does not break as a result of the pulling force.
If you want to offer the best solutions to your customers, you need to know under what conditions the product does not break before you sell it. The membrane pulling device helps you at this point. It can apply different magnitudes of pulling force, so you can see for yourself how strong it is.
In this way, if it falls far below the required values, you can carry out the necessary work to strengthen it. In addition, after these processes, you can better understand where, how and in which climatic conditions the product can be used.
When using a membrane pull device, you only need to place a sample in the device, then apply the pulling force. Then simply read the results and save them.
Reviews
There are no reviews yet.